TOPIC: Chris Craft Botch Job

Chris Craft Botch Job 7 years 8 months ago #129973

Nautilus
Topic Author
Offline
Contributing Member
Posts: 1577
Karma: 87
Thank you received: 58

I'm doing a topside resto on a 1963 Chris Craft Ski Boat. The original idea was to sand the topsides down to bare wood, re-stain and re-varnish. The boat had white vinyl on the topsides when it came from the factory but someone removed it and added "wood" instead. The "wood" was strips of your basic Home Depot indoor wall paneling which I discovered immediately when the sander went right through the microscopic veneer. It had been put down with Gorilla glue and it all had to be chiseled off in a couple thousand pieces.

I tried to sell the idea of taking it back to original by recovering with white vinyl but the owner wants wood decking. I'm in the process of replacing the entire topsides as well as the transom. I'll post photos when finished.

Attachments:

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

Re:Chris Craft Botch Job 7 years 8 months ago #129974

Subaru Scott Offline Junior Boarder Posts: 120 Karma: 3 Thank you received: 0	Looks like lots of fun there Jan, Good Times!! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Chris Craft Botch Job 7 years 8 months ago #129999

Waterwings Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Youch better you than me. Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.