TOPIC: Rusty metal pits be gone!

Rusty metal pits be gone! 13 years 8 months ago #29192

JetDeville700 Topic Author Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Scraped, sanded, cleaned with mineral spirits, blown clean, 2 coats of Rustoleum rusty metal primer, and finally, body fill. More to come, but should be in smooth red soon! Frank Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Rusty metal pits be gone! 13 years 8 months ago #29196

john-gibson Offline Contributing Member Posts: 4014 Karma: 324 Thank you received: 0	looking good frank,which trailer is that?.john Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. \"too soon old,too late smart\" my pap Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.“ ---Mark Twain

Re:Rusty metal pits be gone! 13 years 8 months ago #29198

JetDeville700
Topic Author
Offline
Platinum Boarder
Posts: 3271
Karma: 38
Thank you received: 3

John, it was the tongue off the boat trailer that my Power Cat is on. It is very heavy duty steel, maybe 3/16 stuff, and heavy. I was trying to reduce weight on the trailer, so substituted an 8' piece of 3" sq. 11 ga. tubing. Now, to put brakes on my trailer I need a bit longer tongue, and wanted one anyways. Between the spare tire mount, jack and winch post, there is no room at all. For $62 I could get a 10' piece of the same 3" sq. tubing, but guess what? I don't have $62!

So, the original tongue is going back on the trailer. It's 11' long, so I'll have room to spare (which I like). The reason the tongue is so heavy is because this was a 3500# trailer. It's all set up for brakes, i.e. the hubs are drums. I need an actuator, and all new brakes, except for the drums. The reason I liked this trailer for the Power Cat is the Cat fits between the fenders. Even though the boat is less than 14' long, it is incredibly wide, and that was the only trailer I had that would do it.

If nothing else, I am not going to use the original winch post for this trailer. It is huge and real heavy. So that's the deal, a boat that weighs maybe 700#s on a trailer that weighs more! I'll be glad to get brakes on it.

This is probably more than you wanted to know.

Frank