TOPIC: New to the site

I found this site through the Glastron forum. I bought a boat that the title says its a Glastron but they told me it is a Las Vegas Frontier. So here I am now and here is my boat. It had a 120 hp mercruise. I am now in the middle of putting a 165hp mercruiser inline 6 into it.

Welcome aboard nitrofevr, you're gonna have to get everybody over here caught up, and post some pics so we can see what you're doin', okay!?

Here are some more pics. and here is the beast of a Larson Im taking the motor and lower unit out of. I think its a 72' but beyond that I have no clue. It is in bad need of a floor and title

Progress has been slow. I have the material to make the motor mount I want but I am waiting on purchasing a gimble bearing because I can not find a place locally that rents the tools for it.

It has been a long time but I have made progress. I ran into some alignment issues and lower unit issues but got them straightened out. I have the 165hp I6 Merc in there and tuned up. New cap, rotor, plugs and wires. I also went through the carb. It seems like it is going to be a strong engine! Im not sure what I will do about the tach. It was a I4 and now it looks like it reads fast. It sounds like its idling about 700 but says 1300 or so. There is little to do now but clean it up and throw seats in her. Also, the shroud is a little short so I need to do something with that.

Hi, I was wondering if you have made any progress with your Las Vegas Boat Co - Frontier?

your tach is for the old 4 cyl. you need one for the 6 banger. frog

nitrofevr,

WELCOME ABOARD. = NICE orange boat, too.

yours, satx

Hey guys. crazy I own this boat now.any info would help.

Prepping to paint

This is its little brother

Did all the work myself. The big one is titled as a glastron but has a las Vegas frontier name plate.

Hi slicknick,
I also rescued a Las Vegas Frontier. Mine has a 455 Olds engine and a Berkley jet drive. This is how it looked when I towed her home!
Since then the seats, carpet, floor has been taken out and I'm working on getting the engine running.(blown head gasket!)