TOPIC: A place for real boats with real motors

A place for real boats with real motors 13 years 10 months ago #25322

jimandros Offline Gold Boarder Posts: 652 Karma: 76 Thank you received: 37	Without sounding negative, it is about time this subject matter was made welcome. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 9 months ago #27988

oldmariner Offline Fresh Boarder Posts: 15 Karma: 2 Thank you received: 0	I just found this thread and second your comment. Previously I have felt like the "odd man out" since two of my three boats are In/Outs. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 6 months ago #34348

Bellringer
Offline
Fresh Boarder
Posts: 2
Thank you received: 0

I just bought my first fiberglassic and need some help. I have a 1960 Bellboy with a Volvo Penta I/O, its a aq80 i think or a Marine B6 motor. Anyways I have had it running but the carbs are constantly having issues, cleaned them several times but really I need a kit or new carbs or a conver kit. Plus the motor is week, it sounds good, its runs well all tuned up but it only pushes about 9mph on a good day.

You guys know a good place for parts or have any help or guidance, to get my real boat with a real motor running better! Thanks.

Justin

Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 5 months ago #35417

DaveS
Offline
Fresh Boarder
Posts: 7
Thank you received: 0

does your eng still have points ignition in the distributor if so check the dwell i have had similar problems it probably runs perfect with no load and has no power as soon as its in gear if you can find one invest in an electronic ignition far superior to points and very inexpensive and easy to install

Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 5 months ago #36557

oldmariner Offline Fresh Boarder Posts: 15 Karma: 2 Thank you received: 0	I had a Pertronix unit installed in my Volvo/Penta. The marine mechanic tried to discourage me, but I insisted. It runs great with the electronic ignition. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 5 months ago #36753

DaveS Offline Fresh Boarder Posts: 7 Thank you received: 0	i am a mechanic and it is definately worth it far less maintainance and sure starting Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:A place for real boats with real motors 13 years 4 months ago #41984

jepstr67
Offline
Contributing Member
Posts: 649
Karma: 13
Thank you received: 1

I collect older cars. Converting to electronic ignition is well worth the effort. Sorry, but I know nothing of Volvos, but if the same motor exists in a car, you can simply install the newer electronic ignition parts from a car onto the boat motor. I did that with my 1970 Cadillac 472. In 70, Cad had a point ignition, but in 72 they went to electronic HEI. It was easy to just grab all the parts of a car in the junk yard and transfer to my car.

With our Mercruiser, it is far cheaper to buy, for example, a Rochester 2G carb kit for a 1967 Jeepster, than to buy the 1981 Mercruiser kit for a boat. Same identical carburetor. WAY different price.

Definitely try to discover what parts from cars will fit on your boat motor. It can save you some serious coin!