You are here: Home

Mercury Outpost

calling dr. frankinmerc

Welcome, Guest

Forum

Home

Mercury Outpost

calling dr. frankinmerc

Page:
1

TOPIC: calling dr. frankinmerc

calling dr. frankinmerc 13 years 2 months ago #37387

frog Topic Author Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	hi, you have been alot of help to me in the past, and i need some more, i have a 1966 merc 500 and the serial # is 2108376 does this motor have points or electronic ign? thanks again. frog Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: calling dr. frankinmerc 13 years 2 months ago #37388

professor Offline Gold Boarder Posts: 758 Karma: 87 Thank you received: 1	Runs with a magneto -no battery required Does have a set of points / coil and condenser Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: calling dr. frankinmerc 13 years 2 months ago #37392

dave bernard Offline Platinum Boarder Posts: 1470 Karma: 95 Thank you received: 30	points set at .010 or 54 degrees. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:calling dr. frankinmerc 13 years 2 months ago #37395

frog Topic Author Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	thank you guys for the info. now i think i remember reading that you can take the mag cap and lower part of the mag off to replace the points, with out having to remove the timing belt. is that correct or did i dream that? thanks again. frog Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:calling dr. frankinmerc 13 years 2 months ago #37404

MadProps Offline Gold Boarder Posts: 703 Karma: 27 Thank you received: 0	yes remove the 4 bolts holding the mag to the tower , when it drops you will see the shaft can only go back in one way ...there is no way to install it wrong, go forth Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:calling dr. frankinmerc 13 years 2 months ago #37456

frog Topic Author Offline Platinum Boarder Posts: 1431 Karma: 59 Thank you received: 3	thank you, madprops, i'll give it a try and let you know when i screw it up. lol frog Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:calling dr. frankinmerc 13 years 2 months ago #37457

Aqualift Offline Junior Boarder Posts: 104 Karma: 9 Thank you received: 0	Nice looking motor and Glastron. Very similar to mine, as I have a 65 Merc 500 and 70 Glastron SkiFlite. Wish my 65 Merc was a true longshaft like yours. (Has 5" extension) Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1970 Glastron V-142 SkiFlite 1965 Merc 500 1968 Merc 500

Page:
1

Moderators: kensikora, classicfins, bruce gerard, billr, mrusson, cc1000, MarkS, Waterwings, jbcurt00

Forum

Home

Mercury Outpost

calling dr. frankinmerc

Time to create page: 0.174 seconds

Powered by Kunena Forum

Donate

Please consider supporting our efforts.

Glassified Ads

1958 Skagit Sportster ( / Boats) 09-25-2024

Winner Marauder - the classic 1970 runabout!
( / Boats)

Winner Marauder - the classic 1970 runabout!

09-16-2024

TEE NEE TRAILER W/BEE BOAT
( / Boats)

TEE NEE TRAILER W/BEE BOAT

09-11-2024

FG Login

Advertize

FiberGoogle

Who's Online

We have 8049 guests and no members online