TOPIC: Distributor cap terminals. Grease or no grease?

Distributor cap terminals. Grease or no grease? 7 years 8 months ago #133550

kck8385 Offline Fresh Boarder Posts: 24 Karma: 1 Thank you received: 0	Replacing my distributor cap and the screw terminal ends of the wires were covered in grease when I removed them from the cap. Smells like cosmoline. I only run on a fresh water lake and store the boat inside. Should I re-grease the connections or leave it dry? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

gfgarland Offline Expert Boarder Posts: 363 Karma: 47 Thank you received: 3	Yes, lube them with dielectric silicone grease. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

kck8385 Offline Fresh Boarder Posts: 24 Karma: 1 Thank you received: 0	Thank you for the reply. I had it back together a month ago and left the connections dry when I put it back together. I may pull it back down in a few months and see if there is any corrosion. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.