1960 Whitehouse victoria

1960 Whitehouse victoria 10 years 7 months ago #94288

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	I picked her up last summer, from the glassified's on this site. She's different i never scene anot0her one yet! I will be doing a full restore. I took the winter off to work on snowmobiles but she should be ready for next summer ! Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 7 months ago #94290

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	More pics Woops didn't think that was gonna be upside down! Don't know how to change, sorry guys! Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 7 months ago #94291

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	I got the benches out and floors real soft. i guess it has a bolsum floor, so no stringers? Has anyone done one? I like to research what I'm getting into I will post more pic's as i go Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 7 months ago #94293

SteveH Offline Expert Boarder Posts: 413 Karma: 11 Thank you received: 0	Nice looking boat. Should be fun! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 5 months ago #96865

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Starting to cut her up, do to the shape of the transum (outward curve). I will be replacing it from the inside.

So the cutting begans! Taking just enough of the splash well out to work and replace the wood.

It's kinda an unusual shape transum. I instead of a "Y" shape I'm going flat across the whole thing? Plus braces, according to the literature I've read, it's rated for 150hp, but it seems a little flimsy the way it was originaly?

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 5 months ago #96871

1968jetflite Offline Contributing Member Posts: 474 Karma: 24 Thank you received: 4	Wow! what an awesome looking boat. I am very jealous of you, I'm glad to see that you have started working on it. Keep posting your progress I really want to see how this one turns out. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 5 months ago #96973

MarkS Offline Moderator Posts: 5348 Karma: 118 Thank you received: 5	1968jetflite wrote: Wow! what an awesome looking boat. I am very jealous of you, I'm glad to see that you have started working on it. Keep posting your progress I really want to see how this one turns out. X2! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Mark

Re:1960 Whitehouse victoria 10 years 5 months ago #97031

Waterwings Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	X3! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 5 months ago #97067

whatsleft
Offline
Expert Boarder
Posts: 282
Karma: 17
Thank you received: 1

X4!

As to the transom, it looks like it was set up for a short shaft motor so should be fine to raise it, but pics can be deceiving. Just make sure you don't go too high for whatever outboard you are putting on it. I'd think it would definitely be stronger, and I don't think it would affect the look at all.

Cool Boat!

Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 5 months ago #97089

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Hey whatsleft,
That's a good point! My plan is to raise the transum 5in in the center for a longshaft. I have an abundance of them kicking around so there's no shortage on parts!
I have this 64 starflite that's in running condition. I really like the look of the cowl! But the e-shift is kind of a bummer! Also have a few 60 sea horses laying around, so who knows? Definitely going long tho! [img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/CAM00132.jpg[/img [img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/CAM00129-20140701.jpg

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 4 months ago #98936

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	Finally got her in the garage! After getting the seat out, I started cutting into the floor! The floor was very wet and rotten, made for a fairly easy removal! So now to remove the rest of the transom, I'm thinking of using plywood to put back in the floor? Any thoughts? Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 4 months ago #98943

jim18611865 Offline Contributing Member Posts: 387 Karma: 7 Thank you received: 0	What is under those floorboards? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 4 months ago #98949

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Jim that green color is the bottom of the boat. The floor boards where 3/4 thick by 2in wide. They pretty much covered the bottom with resin and stuck the wood right to the bottom. I'm thinking about 2 or 3 layers of plywood would hold up nicely! And I would be able too make the curve if I put them in one at a time. Matt
Quick pic through the front hatch!

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 4 months ago #98963

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

I know it wouldn't be following the original construction Matt, but what about laying down a couple of 1"x2" "stringers", and filling the void between with pour in foam? Maybe some of the gang with more experience can chime in with their opinion, but I'm thinking it might be a good bit lighter than laying in layers of plywood? It might also give you the opportunity to level out the floor some, as well as providing some floatation.

Just a thought, that's what usually gets me in trouble!

Please Log in or Create an account to join the conversation.

Mark

Re:1960 Whitehouse victoria 10 years 4 months ago #98997

HandyAndy Offline Moderator Posts: 1107 Karma: 102 Thank you received: 12	Here's an old ebay photo of a Whitehouse cruiser like yours: Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 4 months ago #99045

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Awesome pics! Looks like the Polaris model. Thanks Andy!

Hey mark, I was thinking about those stringers, the only problem I may have
Is head room? It doesn't have to be exactly like original just strong. Thanks
for your input! I like too brainstorm! Thinking about captain chairs instead
of a bench up front? Matt

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 4 months ago #99055

whatsleft
Offline
Expert Boarder
Posts: 282
Karma: 17
Thank you received: 1

That is cool. I am by no means an expert on this, but it looks like those benches and possibly the front seat helped to give it strength and stability across the hull- no? Can't tell if benches went below wood but looks like it did. Anyway, you could do a 2/3 stringer/plywood floor from transom to a few inches under roof then a small step down to maintain some head room. Would definitely go with captain chairs up front...less twisting around and banging knees, arms, legs, head...etc...lol. Are you leaving it open, or thinking about a wall like in the pictures?

Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 10 years 4 months ago #99437

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Hey whatsoever,
The. benches probably do play a part in strength and stability.
I plan to put the rear one's back in, still unsure what's going back in the floor though? As far as the "wall" i'm leaving it open, driving from in the cab is what makes her unique! Plus I like the open feel yet still out of the weather. I can probably boat right up till the ice starts lol well it gets cold up here in n.y. so maybe not!
Matt

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 10 years 3 weeks ago #102851

Paul Offline Expert Boarder Posts: 418 Karma: 4 Thank you received: 7	It's really coming along Matt. Keep the pictures coming. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 9 years 8 months ago #107534

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Finally warming up a little bit, so back to work!
Still shooting for mid summer on the lake!

I'm going to layer plywood in the floor, so I needed to fill the spin so that my resin did run out from behind the wood

3/4 X 3/4 strips imbedded in dura-glass worked out nicely!

Some pre bending with a ratchet strap!

Started getting first layer in. I decided to do the first layer with shorter pieces because they bend easier. I hope to get all the floor in this coming week, then hopefully pedestals for my captains chairs!

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 9 years 8 months ago #108462

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Finally got all the wood in!

the transom came out great!

the pedestals should work out great as well

off set for leg room and comfort. Recycled captains chairs! They look like a heap now but they'll look like a million bucks later!

Hopefully I will be able to start glassing the floor this weekend, 2 layers of wood and 2-3 layers of glass should strengthen her up nicely!

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 9 years 8 months ago #108464

amreame Offline Junior Boarder Posts: 137 Karma: 1 Thank you received: 3	Looks good! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1960 14' Speed Queen 1972 10' Tri-Cat 3 [Building] 10' Glen-L Squirt

Re:1960 Whitehouse victoria 9 years 8 months ago #108468

Waterwings Offline Contributing Member Posts: 4887 Karma: 107 Thank you received: 100	Great progress so far!!! Bob Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 9 years 8 months ago #108488

whatsleft Offline Expert Boarder Posts: 282 Karma: 17 Thank you received: 1	That looks amazing! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 9 years 8 months ago #108560

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	I figured while I was fiberglassing I'd give the windshield a go! Surprisingly I had enough of the windshield left to zip tie and make a pattern. Wish me luck! Matt Actually the pattern came out decent.think I'm going try Polly carbonate instead of plexiglass. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 9 years 7 months ago #109151

Paul Offline Expert Boarder Posts: 418 Karma: 4 Thank you received: 7	Lookin good Matt! If I had your ambition I may have kept it. A boat like that definitely needed to be resurrected. Too cool and rare to scrap. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 9 years 2 weeks ago #117965

Redneck_davis Offline Junior Boarder Posts: 60 Thank you received: 0	Any progress on this? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 8 years 7 months ago #122453

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

Well last July didn't work out for me, but I think I have a chance at getting her done this July! She is mostly in primer on the deck, a bit more sanding on the hull before icing and gel coat. And I have started the interior, still a lot to do in a short time! Hopefully life doesn't get in the way and hopefully the admiral keeps giving me weekend passes!

[img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/0517161502b.jpg[/img [img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/0512161349a.jpg

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 8 years 7 months ago #122456

1968jetflite Offline Contributing Member Posts: 474 Karma: 24 Thank you received: 4	Glad to see you are still at it and making good progress. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1960 Whitehouse victoria 8 years 7 months ago #122457

matty83
Topic Author
Offline
Junior Boarder
Posts: 79
Karma: 6
Thank you received: 0

matty83 wrote:

Well last July didn't work out for me, but I think I have a chance at getting her done this July! She is mostly in primer on the deck, a bit more sanding on the hull before icing and gel coat. And I have started the interior, still a lot to do in a short time! Hopefully life doesn't get in the way and hopefully the admiral keeps giving me weekend passes!

[img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/0517161502b.jpg[/img [img]http://www.fiberglassics.com/media/kunena/attachments/legacy/images/0512161349a.jpg

Anyone want to guess what color she's going to be?

Attachments:

Please Log in or Create an account to join the conversation.

1967 Crownline-for the river
1960 Whitehouse-for the lake
1963 Starcraft-for fishing

Re:1960 Whitehouse victoria 8 years 7 months ago #122458

matty83 Topic Author Offline Junior Boarder Posts: 79 Karma: 6 Thank you received: 0	The one thing I can't seem to find is a picture on a vin tag so that I can make one. Can someone send me a pic of one? Any help would be greatly appreciated! Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1967 Crownline-for the river 1960 Whitehouse-for the lake 1963 Starcraft-for fishing