TOPIC: My 1958 Redfish Shark Deluxe

My 1958 Redfish Shark Deluxe 12 years 3 months ago #73134

merlin6707 Offline Fresh Boarder Posts: 8 Thank you received: 0	So I just bought a '58 Redfish and I need some info for it's restoration like a starboard transom handle, wiring diagram for the bow light for starters. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:My 1958 Redfish Shark Deluxe 12 years 3 months ago #73151

merlin6707 Offline Fresh Boarder Posts: 8 Thank you received: 0	Here are pictures, let me know what you think Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:My 1958 Redfish Shark Deluxe 12 years 3 months ago #73152

merlin6707 Offline Fresh Boarder Posts: 8 Thank you received: 0	The Original motor Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:My 1958 Redfish Shark Deluxe 12 years 3 months ago #73153

merlin6707 Offline Fresh Boarder Posts: 8 Thank you received: 0	The back seats are upholstered the same way. Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:My 1958 Redfish Shark Deluxe 12 years 3 months ago #73164

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

Congrats on the Redfish Merlin, and welcome. Those stern handles are fairly common on boats from that era up through the 60's, just keep an eye out on the Glassifieds here, Ebay, etc.. The bow light should have two wires, hot and ground. The ground would normally come back to a "common ground" somewhere under the dash, sometimes using the ignition switch or control box ground. (Better to have a separate ground from the battery, but we have seen it done that way.) The hot wire should go to a switch on the dash for the Nav lights. Many times a three position switch was used, off/anchor/nav & stern light.