TOPIC: couple questions about painting deck

couple questions about painting deck 10 years 3 months ago #96774

hpcma1
Offline
Fresh Boarder
Posts: 4
Thank you received: 0

ok so the top layers of the deck are fiberglassed(polyester/waxed). the decision has been made to use tractor paint for the finishing paint. do i have to use a primer, or can i just get away with paint&hardner? im guessing i should go with sanding before painting also correct, cause it has a shiny finish?

Please Log in or Create an account to join the conversation.

Re: couple questions about painting deck 10 years 3 months ago #96792

satx78247 Offline Contributing Member Posts: 2688 Karma: 66 Thank you received: 3	hpcma1, WELCOME ABOARD. To get a NICE finish follow the company's directions EXACTLY, is my advice. yours, satx Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Resistance to tyrants is obedience to Almighty God. Thomas Jefferson, 1803

Re: couple questions about painting deck 10 years 3 months ago #96796

hpcma1 Offline Fresh Boarder Posts: 4 Thank you received: 0	does one need to primer fiberglass? i know for metal. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:couple questions about painting deck 10 years 3 months ago #96802

MarkS
Offline
Moderator
Posts: 5348
Karma: 118
Thank you received: 5

I think you'll get a much nicer paint job if you do use primer first. I did not, and there are several places the color is slightly uneven, and you can tell the texture changes. They're hardly noticeable, but I know they're there!

Primer also helps promote good adhesion for the top coat, although I haven't had any issues with that. Preparation they say is the biggest factor in how a paint job turns out, I know I sanded until I couldn't sand it anymore! (Little play on words, sorry.)