TOPIC: 1958 Glastron SurFflite

1958 Glastron SurFflite 10 years 7 months ago #90188

sbfins Offline Fresh Boarder Posts: 3 Thank you received: 0	Just restored my boat,Looking for a contact to get new molding that goes between the top and bottom half(rub rail).Any ideas?Thanks. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1958 Glastron SurFflite 10 years 7 months ago #90190

1968jetflite Offline Contributing Member Posts: 473 Karma: 24 Thank you received: 4	A picture of what you are talking about would help. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: 1958 Glastron SurFflite 10 years 7 months ago #90191

satx78247 Offline Contributing Member Posts: 2688 Karma: 66 Thank you received: 3	sbfins, WELCOME ABOARD. yours, satx Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Resistance to tyrants is obedience to Almighty God. Thomas Jefferson, 1803

Re: 1958 Glastron SurFflite 10 years 7 months ago #90192

thetudor
Offline
Platinum Boarder
Posts: 1204
Karma: 33
Thank you received: 2

SB, I'm doing a 59 Seaflite so I probably know what you are looking for. I'm assuming it is a rubber insert in an aluminum casting. Do you have the casting and are you going to re-use it? Wefco is the 700 lb gorilla for rubrails. However, if you are trying to get something to fit the old casting, get a sample from them and see if it fits. I have yet to find one and am thinkiing about replacing the casting and rubber (I believe Wefco makes both)

Love to see pics.