TOPIC: Paint Remover

Someone painted the fins on my GlassCraft with black paint. There are a few spots/chips where the red gel coat can be seen. Is there a way that the paint can be removed without harming the gel coat underneath?
Thanks

Quote from gil_72gt-160

If just the paint go to Home Depot and buy a gallon of Citri-Strip paint remover its gel-coat safe and wont leave grinding digs in the gel

I had heard somewhere that paint remover might stain gel coat. Is the citri-strip a less invasive paint remover? That would be great is I could get it back to red without damage.

www.wmbarr.com/citristrip/default.aspx

found this stuff smart strip

www.dumondchemicals.com/home-peel-away-smart-strip.html

and a marine use version

www.dumondchemicals.com/home-peel-away-marinesafety-removers.html

SteveH wrote:

I had heard somewhere that paint remover might stain gel coat. Is the citri-strip a less invasive paint remover? That would be great is I could get it back to red without damage.

it wont harm / stain / touch gel coat . It just takes time to work .