Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Home
Main Forum
Making a New Plexiglass Windshield
  • Page:
  • 1

TOPIC: Making a New Plexiglass Windshield

Making a New Plexiglass Windshield 11 years 7 months ago #74590

  • cc1000
  • cc1000's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Posts: 633
  • Karma: 34
  • Thank you received: 0
** This thread discusses the content article: Making a New Plexiglass Windshield **

Please Log in or Create an account to join the conversation.

Dave in sunny Buffalo


Classic Fiberglass Boat Owners Association:
www.classicfiberglasboats.com/

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74600

Yeah Andrew did a great job .

Bob

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74603

Pretty comprehensive article... should make it into the Library for reference.

Please Log in or Create an account to join the conversation.

Hello, World!!

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74624

very nice
did you fab the mounts or are they the stock TaylorMade ??
and if they were TM how did they match with the Uchannel ??

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74628

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
(From the original article;)
Andgott wrote:

The brackets are another story- They are Taylor 1623. Not made any more, and getting hard to find! I bought up a small stash of them, but don't have a lot left. I've got a set of them on E-Bay at the moment. Most suppliers seem to be out of them. I wish I'd have ordered more when I had the chance!

to which Deanlofall replied:

Taylor also has a "hidden" hold down, (not near as cool as what Andrew is using) I am not sure if they are still in production, but readily available... they attach on the aft side of the windshield, so you only see the screw heads from the deck of the boat. I've used these on several windshields:
www.amazon.com/gp/product/B0000AZ7RC/ref=ox_sc_act_title_1?ie=UTF8&smid=A1Z3V83M819OQA

HTH

Please Log in or Create an account to join the conversation.

Mark

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74679

  • Andgott
  • Andgott's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1243
  • Karma: 72
  • Thank you received: 0
Thanks.... At first it was a daunting project, but it was not really that tough. The most intimidating part is cutting into that piece of plexi for the first time- It's pretty pricey stuff :)

I think it looks GREAT-







But then again I'm probably a little bit biased :)

-Andrew
Attachments:

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74682

Nice job Andrew. Looks great. Do you know where to find the stock wing tip brackets that you have on the side of your windshield? One of mine fell off.

Bob

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74687

one very nice looking Glassic wish mine was as nice can't wait for spring and ice out hear in Mn.

Please Log in or Create an account to join the conversation.

Making a New Plexiglass Windshield 11 years 7 months ago #74801

Do you not need to "Un-anneal?" the aluminum to restrengthen it? Or is there even a such thing? BTW real nice job!

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74819

  • StevieB
  • StevieB's Avatar
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 266
  • Karma: 12
  • Thank you received: 0
Big Thanks for the article! We are going to be working on the Glastron Jet-Flite's Windshields this summer, thanks to you!

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74820

  • StevieB
  • StevieB's Avatar
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 266
  • Karma: 12
  • Thank you received: 0
Big Thanks for the article! We are going to be working on the Glastron Jet-Flite's Windshields this summer, thanks to you!

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74839

  • Steve G
  • Steve G's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 39
  • Karma: 2
  • Thank you received: 0
Hey guys I was at C-ME Marine in Buffalo today and there is a bunch of taylor made windshield hold down part #1623 on the shelf.I did not find em on there web site but you can call the store and I'm sure it could be shipped. www.c-mesales.com/index.html

Steve G

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 7 months ago #74843

  • StevieB
  • StevieB's Avatar
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 266
  • Karma: 12
  • Thank you received: 0
Steve G,
Big Thanks from StevieB!
I just ordered my set of Taylor Made Windshield Fasteners from them.!
Regards,
StevieB

Please Log in or Create an account to join the conversation.

Making a New Plexiglass Windshield 11 years 6 months ago #75790

This story was truly an inspiration. I went to a fellow that builds winddhields for classic boats discretion does not allow me to mention names but it begins with U and it's in Davie Fl. I took my boat to him and showed him what I needed. He told me to build a pattern and out line the base of the windshield and bring it back, It would take about a month and cost over $400.00 I thought if I am going to do all the work why have him do the easy part? Then I saw your post. So I bought a peice of 3/16 Lexan heated it over a large metal tube bent it to shape. I wanted something to hold my top down so instead of channel I used awing holder. It makes a nice finish on the out side and I can slip my canvas top in the rope lock. I used the same Taylor made base gasket but I fashioned my hold downs out of SS flat rope hooks. I'll send pic when I am finished.

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 6 months ago #75906

Thank You so much. I have been trying to get my windshield issue ( no windshield) resolved for a while..... Makes it so easy! I will defiantly send some pics when complete!!!

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 6 months ago #75924

That came out really nice! In my case, I would be using the original upper and lower frames. What would you suggest using to take up the extra space left by the thinner material?

Thanks,
Mark

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 6 months ago #75933

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
I believe Andrew cut some thin strips of the same material to lay in the groove beside (on the inside) the windshield to take up the "slack". (I know it was in his original thread, not sure if that made it into the article or not. My memory isn't what it once was.) ;)

Please Log in or Create an account to join the conversation.

Mark

Re:Making a New Plexiglass Windshield 11 years 6 months ago #75967

  • cc1000
  • cc1000's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Posts: 633
  • Karma: 34
  • Thank you received: 0
MarkS wrote:

I believe Andrew cut some thin strips of the same material to lay in the groove beside (on the inside) the windshield to take up the "slack". (I know it was in his original thread, not sure if that made it into the article or not. My memory isn't what it once was.) ;)


It made it:

I slipped the strips in on the back of the windshield-

fiberglassics.com/images/stories/3WshieldGap.jpg

I found that if you push them towards the bends in the corner, they'll slide right in place, and kind of 'pinch' the windshield into place. If it's done right, there won't be a gap on the outside-

Please Log in or Create an account to join the conversation.

Dave in sunny Buffalo


Classic Fiberglass Boat Owners Association:
www.classicfiberglasboats.com/

Re:Making a New Plexiglass Windshield 11 years 6 months ago #75978

Oh, that's perfect. I'm going to check out lexan or equivalent next week. Looks cost effective and very nice looking too.

Please Log in or Create an account to join the conversation.

Making a New Plexiglass Windshield 11 years 6 months ago #76005

I have an "old boat" that was built in my home town around 1958. Beleive it or not, the windshield is without a scratch, but I could use the vinyl weather stip at the bottom. THANKS FOR THE SOURCE!!!

Please Log in or Create an account to join the conversation.

Making a New Plexiglass Windshield 11 years 6 months ago #76013

I have a Bell Boy Bonanza with a 6' beam. Windshield looks just like yours (according to ads and pictures I have),
I'm assuming each windshield is a different size correct? My restoration project has no windshield to template from. Ideas?
Thanks!

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 11 years 2 months ago #81617

Great job - looks beautiful.
Is this an old Glastron?
I have a 1960 Glastron fireflite (my dad bought it new!), and the bow light is the same as in your photos. My bow light is broken - both lenses gone, and the lower metal part is broken. The lenses have to have a curve to them. I am thinking of starting with some clear acrylic and heating it to bend and then add some thinner colored "gels" for the red and green.
Any ideas on where to get that same bow light? Was it an exclusively Glastron part or was it more widely used? Ours does have the little mast for a banner. Some of your earlier photos do not have it, and the final one does. - ?
Thanks for any input,
Rolf
Attachments:

Please Log in or Create an account to join the conversation.

Making a New Plexiglass Windshield 10 years 8 months ago #88331

Great instructions. I need to make one for my '60 Starcraft. How did it hold up?
Thanks

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 10 years 7 months ago #90069

Here's my windshield I just got done for my '60 Starcraft Jupiter. It took me about 2 days. Just went slow. I used a grinder with flap disc to remove extra material on the corners. I still need to paint the bow so will leave the protective plastic on till it's time to go out on the water. Thanks to Andrew for his great instructions.
Attachments:

Please Log in or Create an account to join the conversation.

Re:Making a New Plexiglass Windshield 10 years 7 months ago #90104

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
Looks like it turned out pretty nice Buddy, hope to see some pics when she's all finished. ;)

Please Log in or Create an account to join the conversation.

Mark

Making a New Plexiglass Windshield 8 years 8 months ago #119147

I'm trying to get this same rubber base gasket to set on my Starcraft Bahama windshield, but does not like to stay on. Andrew, did you use silicone in the groove of the gasket, and if so, how did you get it to stay until cured? Every time I try, it's pulling off at the curves and right behind where I just fit groove onto windshield. Any suggestions appreciated.
Steve

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Forum
Home
Main Forum
Making a New Plexiglass Windshield
Time to create page: 0.284 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1958 Skagit Sportster
( / Boats)

1958 Skagit Sportster
09-25-2024

Winner Marauder - the classic 1970 runabout!
( / Boats)

Winner Marauder - the classic 1970 runabout!
09-16-2024

TEE NEE TRAILER W/BEE BOAT
( / Boats)

TEE NEE TRAILER W/BEE BOAT
09-11-2024

FG Login

Clubstore

FiberGoogle

Who's Online

We have 5564 guests and one member online