TOPIC: Pix of test props ?

What I'm realy looking for is a test prop for a Homelite or Bear Cat
But will take any pix of test props you have Wanting to see if maybe I can make one.
Thanks
Mike aka the pirate

Hey Mike,here's one I just got for my 62 v-4 off ebay. Works great.jim

Thanks for the pic any chance of seeing what the other side looks like?
Mike aka the pirate

Here's variable pitch prop that came with my Aqua Ray

pathfinderz1 wrote:

Thanks for the pic any chance of seeing what the other side looks like?
Mike aka the pirate

Here's one on ebay just like it.

I have 2 OMC pin drive props, I thought if the shaft size was the same they would fit. The one on my Johnson 40 hp measures 2.46" from front hub to center of pin hole. The pin drive OMC on my McCollough measures 3.36". So, careful when ordering props online. Get full specifications

some of the test props on Ebay the OMC ones just might work but would have to bore them out a little. The prop shaft on homelite is a few .000 bigger. Will have to check the thickness of the hubs
Thanks everybody
Mike aka the pirate