TOPIC: Need help

Need help 12 years 5 months ago #60587

BigDog1024
Offline
Fresh Boarder
Posts: 4
Thank you received: 0

I am restoring a 1964 Sea King. I found a Gale motor that appears period correct but cannot figure out year or hp. I found the following numbers on the transom: MN - 25DE21BL; SN - 869428. I assume it is a 25hp. No clue on year. It was on a Sea Star I just picked up.
I see some guys on here decipher these numbers well. Any help is greatly appreciated.

Please Log in or Create an account to join the conversation.

Re:Need help 12 years 5 months ago #60589

BigDog1024 Offline Fresh Boarder Posts: 4 Thank you received: 0	pic attached Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Need help 12 years 5 months ago #60608

riceman
Offline
Contributing Member
Posts: 397
Karma: 12
Thank you received: 0

normally i go to marineengine.com and use the "look up by model number" feature, but they didn't seem to have any info on Gale products. a little googling and this site came up:

rides.webshots.com/album/556069829UxPOdN

a little looking through the index and i ended up on this page:

rides.webshots.com/photo/2752489300091848696TTJHpZ

it looks like your motor is a 1963 25hp Buccaneer. i'd wager that the "L" only stands for long shaft, but i am not certain.

Please Log in or Create an account to join the conversation.

Re:Need help 12 years 5 months ago #60618

BigDog1024 Offline Fresh Boarder Posts: 4 Thank you received: 0	Thanks riceman. That's a huge help and good news. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.