Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: One way to fix a hard top with damaged texture

One way to fix a hard top with damaged texture 12 years 10 months ago #49535

  • Jim L
  • Jim L's Avatar Topic Author
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
Years ago,I found this top on an Aristo in the woods. The boat had been shot numerous times in an attempt to rid it of mosquitoes and was about to be crushed and buried so I rescued the top ,but the texture on the top was toast. So this was my solution(to put vinyl top material over the texture).Just thought I'd post this if anyone else had this problem.Turned out pretty good IMHO..

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49539

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
Pretty cool idea Jim, I like it! Beautiful boat, BTW. ;)

Please Log in or Create an account to join the conversation.

Mark

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49540

like it... i think 65 was the first year for vinyl on cars.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49541

  • Andgott
  • Andgott's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1243
  • Karma: 72
  • Thank you received: 0
Looks GREAT!!

How did you adhere it to the top?? I'm thinking of a similar treatment for the dash on my truck...

-Andrew

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49544

That looks amazing ! Great idea..
The boat is sweet.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49547

  • Jim L
  • Jim L's Avatar Topic Author
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
Thanks guys, I used 3M contact adhesive spray. Andrew,I recovered a padded dash on a 66 ford pu a long time ago. It's not too bad cause you have those trim pieces and end caps on most of the edges to cover the vinyl, but those sharp turns on the corners are a little woolly. :laugh: When I found the hardtop,it had one bullet hole. I guess the next hole would have been made by a track loader bucket tooth :angry: !

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49549

  • jepstr67
  • jepstr67's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 649
  • Karma: 13
  • Thank you received: 1
That sounds and looks like a great idea. Did you use a spray mount adhesive or what. I've tried to do stuff like that with contact cement, but it is hard to keep wrinkles out as you press the vinyl down onto the surface.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49551

Excellent idea Jim, she looks fantastic!

Bob

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49553

  • Jim L
  • Jim L's Avatar Topic Author
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
jepstr67 wrote:

That sounds and looks like a great idea. Did you use a spray mount adhesive or what. I've tried to do stuff like that with contact cement, but it is hard to keep wrinkles out as you press the vinyl down onto the surface.

I used the spray, started in the center and worked my way to the outside. The only problem I had was some slight shrinkage of the material over the edges of the recessed area in the center where it steps down, but I figure when I had of gotten to those areas,got it bonded and let it set up a while longer, then proceeded, I might not of had that issue.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49554

  • Jim L
  • Jim L's Avatar Topic Author
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1426
  • Karma: 60
  • Thank you received: 2
One of the things I like about the vinyl verses the original texture is the vinyl has a soft touch to it.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49558

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
Probably transfers less heat to the underside area too, I would imagine?

Please Log in or Create an account to join the conversation.

Mark

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49560

ron,i don't know when vinyl roofs were first available from the factory on cars but ford did offer them in 62 on the t-bird landau

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49574

I dont know if its still around, but :) w a y back in high school auto colision (1968). I sprayed on simulated vinyl tops.
you laid down the base coat , then the tape to make the seams,then the texture coat, which was put on with a spatter gun tip on the paint gun.

the spatter tip did give the texture of a real vinyl top

woosterken

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49589

High School Auto Collision? You mean they had classes on that? We had to do that on our own. Auto repair was another story. :laugh:

Great job on the top, BTW.

Please Log in or Create an account to join the conversation.

Todd (aka thetudor)
1964 Custom Craft Aqua Ray
1959 Glastron Seaflite
1959 Tomahawk Spirit

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49598

another cool way to create texture is to buy spray-on truck bed liner in the rattle cans. with pratice it looks very vinyl. tremclad offers a textured spray paint also, if a finer texture is desired.

Please Log in or Create an account to join the conversation.

Re:One way to fix a hard top with damaged texture 12 years 10 months ago #49608

jim,thats a very nice job and a beautiful boat,very nice,john

Please Log in or Create an account to join the conversation.

\"too soon old,too late smart\" my pap

Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.“

---Mark Twain
  • Page:
  • 1
Time to create page: 0.215 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

TEE NEE TRAILER W/BEE BOAT
( / Boats)

TEE NEE TRAILER W/BEE BOAT
09-11-2024

FG Login

FiberGoogle

Who's Online

We have 6983 guests and one member online