TOPIC: G-3 stringer replacement

G-3 stringer replacement 13 years 11 months ago #32571

Jeff Register
Offline
Fresh Boarder
Posts: 2
Thank you received: 0

What is the correct way to replace the stringers in a 1960 G-3? What kind of wood or hi tech material to use? I have been told to place on flat concrete to keep the keel straight & flat. I am after a strong light repair. I will be running a 1961 Merc 800 with a 1964 Merc 1000 powerhead with low water pick up & going for a fast stable ride.
The transom has been rebuilt already with 5 layers of preresined plywood, wetted rovin woven preresined wood times 5 & inside edges filled with powdered cloth / resin mix in a tooth paste thickness.
Thanks so much.
Jeff

Please Log in or Create an account to join the conversation.

Re:G-3 stringer replacement 13 years 11 months ago #32578

boatsnmotors Offline Junior Boarder Posts: 83 Karma: 5 Thank you received: 0	There is a forum specifically for G3 owners as part of this website. Go to the forums tab at the top and then to G3 Owners Assoc forum. Lots of guys on there have rebuilt lots of G3's and you will find them most helpful. Brian Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:G-3 stringer replacement 13 years 11 months ago #32613

Ponyboy Offline Gold Boarder Posts: 605 Karma: 24 Thank you received: 0	Hi, I have done this job several times, Where are you located? Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.