TOPIC: Glasspar G3

Glasspar G3 13 years 6 months ago #28284

Newbie Offline Fresh Boarder Posts: 2 Thank you received: 0	Good morning all. I have recently became the owner of a 196? Glasspar G3 ski boat. I am not sure of the year and it is desperate need of a restoration. I am going to tackle this myself but could use guidance and advice from the pro's. Happy boating. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: Glasspar G3 13 years 6 months ago #28285

kensikora Offline Administrator Posts: 1082 Karma: 93 Thank you received: 12	Hi, Newbie, Take some pictures for us to see what you have and welcome on board! Ken Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Hello, World!!

Re:Glasspar G3 13 years 6 months ago #28293

pathfinderz1
Offline
Gold Boarder
Posts: 710
Karma: 16
Thank you received: 0

Now you are going to want to go over here for your G3 info that is all these guys do is play with their G3s and work on them. And you will need some pictures top sides inside and bottom. They will tell you what year model and anything else you might want to know.
Heres the link
forums.fiberglassics.com/g3/ Its also right there on the forum dorp down.
Mike aka pathfinderz1

Please Log in or Create an account to join the conversation.

Re: Glasspar G3 13 years 6 months ago #28299

Newbie Offline Fresh Boarder Posts: 2 Thank you received: 0	Pics to come. Be forewarned, she is in bad shape. Thanks for your input. Tom Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Glasspar G3 13 years 6 months ago #28332

pathfinderz1 Offline Gold Boarder Posts: 710 Karma: 16 Thank you received: 0	well I don't think it can be any worse then mine. Right now she is upside doww on the trailer till sprig wating to be worked on. Just to start with new strings and transom and floor. Here are a couple of pix of my inside looking at the strings and transom Mike aka pathfinderz1 Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.