TOPIC: What's the right way to Bed Transom Screws?

What's the right way to Bed Transom Screws? 14 years 1 month ago #26214

wavetrain75 Topic Author Offline Senior Boarder Posts: 150 Karma: 2 Thank you received: 0	I need to run four 1/4" lags into the transom. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:What's the right way to Bed Transom Screws? 14 years 1 month ago #26216

boats Offline Fresh Boarder Posts: 26 Karma: 3 Thank you received: 0	Try here. glassclownboats.com/ProperBeddingTechniques.aspx Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:What's the right way to Bed Transom Screws? 14 years 1 month ago #26228

Bwana Don Offline Contributing Member Posts: 83 Karma: 2 Thank you received: 0	Very well written. I continue to be impressed by the information on that website. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:What's the right way to Bed Transom Screws? 14 years 1 month ago #26254

MyFlamingo
Offline
Expert Boarder
Posts: 404
Karma: 66
Thank you received: 1

I like to drill oversized holes and used Stainless steel threaded inserts. I goop on lots of vaseline on the bolt and the inside threads of the insert, thread the bolt into the insert fill the ovesized holes with thickened resin and bed the threaded inserts with the bolt in the resin. When it hardens I can then unthread the bolt, I NEVER have to worry about water intrusion in my wood, since it is totally encased in resin.