TOPIC: Cable for Cable steering

Cable for Cable steering 4 years 8 months ago #141653

rip fc3 Topic Author Offline Junior Boarder Posts: 63 Karma: 3 Thank you received: 2	Its finally time to replace the 60 year old cable on my Ark Traveler. does anyone know the size cable used in the original manufacturing of the old boats? I cut a piece off to take to the hardware store and compare, but before i go all the way there I figured I would ask the experts. Thanks Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Cable for Cable steering 4 years 8 months ago #141655

Eric Z Offline Contributing Member Posts: 237 Karma: 2 Thank you received: 19	Joe Poole has it and other bits of harware that might be needed. (770) 597-5992 Cell www.fergusonpoolemarine.com Attachments: Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Cable for Cable steering 4 years 8 months ago #141656

63 Sabre
Offline
Contributing Member
Posts: 4676
Karma: 147
Thank you received: 167

Our local farm equipment store sells it by the foot. Two different sizes. I would get the heavier, I think it's rated by amount of weight it will hold. Make sure when you measure you account for the number of turns on your helm and also the extra footage you will need at the motor end to zig-zag back and forth between pulleys and springs plus extra length for the fasteners and adjustments.