TOPIC: Advice on restoring/reparing UV blotching gelcoat

Advice on restoring/reparing UV blotching gelcoat 7 years 5 months ago #131425

El Comandante
Offline
Fresh Boarder
Posts: 3
Thank you received: 0

I have a 1971 Sea Ray srv180 that is factory yellow, hull, deck, etc. Looks great in pics but there is some clouding or blotching in areas. There is not oxidation (chalking) as the boat has always been waxed and polished but it bothers me to have this blotching, seems cloudy etc.
How is this buffed or detailed away? If possible?

Attachments:

Please Log in or Create an account to join the conversation.

Advice on restoring/reparing UV blotching gelcoat 7 years 5 months ago #131426

El Comandante Offline Fresh Boarder Posts: 3 Thank you received: 0	Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Advice on restoring/reparing UV blotching gelcoat 7 years 5 months ago #131452

Pawpaws Boat Offline Expert Boarder Posts: 319 Karma: 3 Thank you received: 2	Nice boat. Maybe try a quality marine polish, or wet sand areas with a fine paper like 1000 grit? There are lots of people on here that would know what to do better than me. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Marty Keeper of Pawpaws Boat 1962 Span America

Advice on restoring/reparing UV blotching gelcoat 7 years 5 months ago #131480

gil_72gt-160 Offline Senior Boarder Posts: 189 Karma: 14 Thank you received: 1	You should post a few more pictures showing the faded areas , its hard to recommend what to do to fix it without seeing it . Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.