TOPIC: recommended fiberglass safety mask

recommended fiberglass safety mask 7 years 7 months ago #130794

curse
Topic Author
Offline
Contributing Member
Posts: 445
Karma: 5
Thank you received: 2

I'm planning ahead on the replacement of the balsa in my floor and will be doing a lot of grinding.

I have looked at 3M's website and they list the 9312 mask for fiberglass dust but when I google the mask not much shows up.

What do you guys recommend for fiberglass grinding? Does the mask just need to be sealed good and be rated N95? I found some 3M 9211 masks that look good.

I have a 3M half mask with 3M 2091 filters. I think this would be fine but want to be as safe as possible.

Thanks!

Please Log in or Create an account to join the conversation.

1960 slickcraft catalina
1963 g-w invader ski-bird
1972 g-w invader drag & ski 14
Portage Michigan

Re:recommended fiberglass safety mask 7 years 7 months ago #130803

Chuck in Cincinnati Offline Gold Boarder Posts: 965 Karma: 46 Thank you received: 43	here is an old thread on the subject that may help ? fiberglassics.com/fiberglassics-forums/home/main-forum/respirators#55335 Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:recommended fiberglass safety mask 7 years 7 months ago #130805

curse Topic Author Offline Contributing Member Posts: 445 Karma: 5 Thank you received: 2	Thanks Chuck. I will be upgrading to a full face. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1960 slickcraft catalina 1963 g-w invader ski-bird 1972 g-w invader drag & ski 14 Portage Michigan