TOPIC: Need help

Hi everyone
I'm new here. I own a 1964 17 1/2 foot sabre craft impella. doing a total restore on this boat myself. I'm having one problem right now finding round aluminum edging. It goes on all the fiberglass edges on the inside of the boat. Any tips would be much appreciated. Here's a pic of what it looks like. Thanks

Welcome aboard, your working on a beautifully designed hull. What does it have for power? You might give Metalmart Inc. in Lehi Utah a try, they carry a varity of shapes and sizes of aluminum and SS.
Try taking a look at Golden State Glassics when your looking around on the web. We are affiliated with this site but are Ca. and we have Ca. activities.

Good luck
Jack

Welcome aboard, we like pictures by the way. As far as the Aluminum edging try googling Taco and see what they have. They have a lot of rubrail including aluminum, they may have what your looking for.

Bob

Thanks jack
I will check there websites. This stuff is hard to find it seems

Hi bob
I'm going to retry posting a pic. Thanks for the help. I will check out taco and see if they have it

Hope this pic loads!

Go back to your above post and hit "edit" then post picture. This should work for the pic!!

Thanks so much jim