TOPIC: Need Help old outboard

Need Help old outboard 14 years 2 months ago #11783

k916
Offline
Fresh Boarder
Posts: 1
Thank you received: 0

hey guys,

i need some help. this motor came with a boat i just bought, and it runs, but i need to adjust the knobs on the back to keep it running. i think its a 1958 sea king. model# GG8985A
Serial# 85X723905. is that right? anyway i can't find any info on it. what are the knobs for?

thanks!!

Attachments:

Please Log in or Create an account to join the conversation.

Re: Need Help old outboard 14 years 2 months ago #11790

Peter_Crowl Offline Contributing Member Posts: 489 Karma: 14 Thank you received: 0	Probably best to post this on the JEGO board here and at www.aomci.net as well. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Need Help old outboard 14 years 2 months ago #11791

JetDeville700 Offline Platinum Boarder Posts: 3271 Karma: 38 Thank you received: 3	Try putting 1958 sea king model GG8985A in google and see what happens. Doesn't bring up a lot, but plenty to get you going. Frank Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Need Help old outboard 14 years 2 months ago #11799

HandyAndy Offline Moderator Posts: 1107 Karma: 102 Thank you received: 12	Sea King GG8985A is a 1958 Gale outboard motor, rated at 25 HP. Here's the reference I used: www.antiqueoutboardwiki.com/wikka.php?wakka=GaleModels Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Need Help old outboard 14 years 2 months ago #11803

Chinewalker
Offline
Gold Boarder
Posts: 548
Karma: 42
Thank you received: 10

Are the knobs moving on their own? If so, they have a packing nut at the base of the needle shaft that might need to be tightened a bit. The knobs should move snugly, but not too snug that you can't adjust them.

The knobs are on the ends of the needle valves. Upper is the slow speed adjustment - usually start at about 1.5 turns from closed. Lower is high speed adjustment - usually start at 1 turn from closed. Adjust from there - usually inwards, until the motor starts to lose power or sneeze, then back out about 1/8 turn. Do the high speed one first.

Please Log in or Create an account to join the conversation.

Re:Need Help old outboard 14 years 2 months ago #11811

john-gibson Offline Contributing Member Posts: 4014 Karma: 324 Thank you received: 0	k916,just for your future reference,gale went out of bussiness and quit making motors in 1963,but most of their parts are johnson/evinrude,so you may still be able to find parts that will work on your motor,john Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. \"too soon old,too late smart\" my pap Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.“ ---Mark Twain

Re:Need Help old outboard 14 years 2 months ago #11822

pathfinderz1
Offline
Gold Boarder
Posts: 710
Karma: 16
Thank you received: 0

For the best info on you motor go over to AOMCI heres the Link
www.aomci.org/cgi-bin/yabb2/YaBB.pl?board=askamember
So of the guys on there have been working on these motors all their lifes
They can give you info on were to get part and all the spec's
Any old motor like that if it has been sitting for a year or more you will want to replace the impeller and drain the lower unit and put in fresh 80wt oil in. I have about 40 or so of these old motors and that is were I go for info. They will tell you the plug settings and points settings. How to adjust the carb and anything else you might need to know and then some.
Mike aka pathfinderz1