TOPIC: ATTWOOD STEERING WHEEL CENTER CAP - TEXAS MAID

Friends,

My "new to me" late 1959-1961 TEXAS MAID OSPREY was originally equipped with an ATTWOOD steering wheel & which wheel is missing the center cap.

Do any of you have a PHOTO of the ATTWOOD center cap that you can post or even perhaps a center cap that is surplus to your needs??

yours, satx

Do you have a picture of your steering wheel ?
Here are a couple of pictures from Ebay

Chuck in Cincinnati,

The 1st steering wheel is the one that I have.

The 2nd one is early-mid 1950s.

yours, satx

here are some pics.

Chuck in Cincinnati,

THANKS, Partner.

NOW I need to FIND one. = As it doesn't have a TM, that shouldn't be difficult.

yours, satx

Hi Satx,

If you find more than one please post here for I need one for the Hydrocon as well.

Thanks, Gene

I will measure ID, OD and thickness of the trim ring.
And the OD of the cap plus the OD of the spring fingers
And post the dimensions later when I get home.
Stay tuned....

Chuck in Cincinnati,

WILCO & THANKS again.

yours, satx

refer to pictures above

gold trim ring:
ID - 1.776 dia. or 1-3/4 by measuring tape
OD - 2.411 dia. or 2-7/16 by measuring tape
Thickness - .021 inches (less than 1/32") don't even bother with measuring tape

Chrome cap:
OD of chrome - 1.921 dia or 1-7/8 / 1-15/16 however you look at it
OD at spring clips - 1.784 dia 1-3/4 but you can bend the springs ?
height of spring clips - .231 inches or 1/4 inch

Disclaimer: Measured with Harbor Freight calipers.
I am not responsible for any dimensions off, due to non-certified
Calibrations

Chuck in Cincinnati; All,

I found another center cap, a few minutes ago. = THANKS for your VERY kind help.

Note to All: We have some of the BEST & MOST-HELPFUL members that are "resident" ANY place, imVho.

yours, satx