TOPIC: Beuhler Turbocraft is BACK!

Beuhler Turbocraft is BACK! 9 years 7 months ago #106279

Shelby18 Topic Author Offline Contributing Member Posts: 436 Karma: 18 Thank you received: 0	Though I think these might be a bit more pricey.... Scroll down on the website for more info. buehler-turbocraft.com/ Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Great to be on board. Rick

Re:Beuhler Turbocraft is BACK! 9 years 7 months ago #106281

Shake
Offline
Gold Boarder
Posts: 983
Karma: 29
Thank you received: 6

Neat, best of luck to them, I really like their 38 flagship, However, the boat in the pictures is only a rendering of a 3d model, and as for moving a 38 foot boat with a jetdrive,,,, not economical at all not to mention a very low top speed... they need to ditch that jetdrive for a set of surface drives, the hull design they have going would be very easy to mod for surface drives... =)

Please Log in or Create an account to join the conversation.

Golden Rule number one; While working in the bilge, absolutely under no circumstances, NO FARTING!!!! Captn Shake aka Joe.

Re:Beuhler Turbocraft is BACK! 9 years 7 months ago #106287

firstfibre Offline Expert Boarder Posts: 321 Karma: 4 Thank you received: 0	Did they raid a library for that file cabinet behind the helm, all that dash space and some pong game taking up no space, they need to hire an Italian to keep the laughter down. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Beuhler Turbocraft is BACK! 9 years 6 months ago #107075

wrenchman Offline Fresh Boarder Posts: 4 Thank you received: 0	Rick, I am having an awful time trying to separate the jet from the transom housing (in order to remove from the boat). Any suggestions? Thanks.Jeff Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.