TOPIC: spark plug terminal spring

spark plug terminal spring 11 years 1 month ago #82955

curse Topic Author Offline Contributing Member Posts: 445 Karma: 5 Thank you received: 2	I need to replace one of the spark plug terminal springs on my 1960 lark 40. Does the spring just pierce the plug wire and that's how it stays on? Does anyone have any tips on replacing the spring? www.marineengine.com/newparts/part_details.php?pnum=OMC0510231 Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. 1960 slickcraft catalina 1963 g-w invader ski-bird 1972 g-w invader drag & ski 14 Portage Michigan

Re: spark plug terminal spring 11 years 1 month ago #82960

professor Offline Gold Boarder Posts: 758 Karma: 87 Thank you received: 1	Add a bit of oil and pull the rubber boot off.----You will then see how it works. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: spark plug terminal spring 11 years 1 month ago #82966

bruce gerard
Offline
Moderator
Posts: 1095
Karma: 77
Thank you received: 5

Yes, the barb on the spring simply pierces the insulation. They can be a little tricky to get the barb to puncture the rubber wire - be careful that you don't poke a hole in your finger. The high - tension spark travels right through this connection - no need for crimping or soldering. As professor says, a dab of oil will help the pull the spring out of the cap. You can also use a dab of silicone grease or dish soap.