TOPIC: 1957 Evinrude Big Twin Info, Needed

1957 Evinrude Big Twin Info, Needed 12 years 8 months ago #56283

mlg Offline Fresh Boarder Posts: 33 Karma: 1 Thank you received: 0	Can't seem to find neutral, well I can move motor shift lever from F/N/R, but prop is still engaged in neutral. Just acquired motor so no past history. All info. appreciated. Thanks Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:1957 Evinrude Big Twin Info, Needed 12 years 8 months ago #56286

EVNRD25
Offline
Fresh Boarder
Posts: 1
Karma: 1
Thank you received: 0

Hey , there is a inspection cover on the shaft of the motor with two screws , remove and there is a
coupler that connects upper shift linkage with lower linkage check to make sure this is connected
properly , there is grooves in the end of each end of each shaft for each of the two bolts to lock this
together properly, if the bolts are not in the grooves you have no shift actuation.

Please Log in or Create an account to join the conversation.

Re:1957 Evinrude Big Twin Info, Needed 12 years 8 months ago #56287

ed-mc
Offline
Platinum Boarder
Posts: 1408
Karma: 232
Thank you received: 115

The shift clevis bolt, under the powerhead, can also come loose, so when you are checking the shift rod coupler on the side, wiggle the shifter handle and check for lost motion between the handle and the shift rod.

You'll be able to see any issues thru the side access cover, if the problem's not there, the next step would be to disassemble the gearcase for inspection.

HTH...........ed