Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Gas tank Questions

Gas tank Questions 13 years 9 months ago #24775

I have two questions; one on a source for old style johnson/evinrude pressurized tanks, the second is on repairing the newer style (post 1960)portable Johnson/evinrude/omc pickup units.

I have three small 5 1/2, (2) 15 hp 1956 Johnson outboards. Is there a source for the old style pressure tanks? I have been watching ebay and craig's list. Did not know if there was a place to buy just the tanks without fitting/handle set up. Tanks have developed leaks

On the newer post 1960 tanks. I have a couple that weep/leak gas when underway around the gas tank fitting. Looking at the exploded drawing of the pickup unit I can see two "O" rings that I suspect are the problem. Question is how do I get to them. The drawing shows a couple of plugs that hold them in. Does anyone know how to get these plugs out?

Please Log in or Create an account to join the conversation.

Re: Gas tank Questions 13 years 9 months ago #24783

Drill a small hole in the plugs and then pry the plugs out.
Replace the o-rings and install new plugs.
Used to do this for people while they waited ( customer service it was called 40 years ago )
Now when I ordered the parts the dealer said " i just sell people new tanks "
You could always tell there was a problem as one pin would stick out further than the other.

Please Log in or Create an account to join the conversation.

Re:Gas tank Questions 13 years 9 months ago #24791

Thanks, where do I find the plugs and "O" ring? Are they dealer items or could I find them at Nappa or big box?

Please Log in or Create an account to join the conversation.

Re: Gas tank Questions 13 years 9 months ago #24794

Any OMC / BRP dealer should have them " in stock "
They used these tanks for many years.
shop.evinrude.com
has the part# I am sure.
Order 3 plugs in case you mess up the first in your repair.

Please Log in or Create an account to join the conversation.

Re: Gas tank Questions 13 years 6 months ago #31976

You could always convert them to single line like this.

www.sschapterpsa.com/ramblings/Converting_dual_fuel_line.htm

Please Log in or Create an account to join the conversation.

Re: Gas tank Questions 13 years 6 months ago #32014

Sierra (NAPA) part # 18-7111

OMC part # 0301824

Please Log in or Create an account to join the conversation.

CAVU

Re: Gas tank Questions 13 years 6 months ago #32026

There is also a really small O-ring where the pin comes out of the housing.
If leakage is persistant replace it too.
I ordered parts to repair these tanks one time and the dealer said
" what are you doing that for , I just sell people a new tank "

Please Log in or Create an account to join the conversation.

Re: Gas tank Questions 13 years 6 months ago #32038

Check with these guys if they don't have what you need they can tell you were to get it. Post your questions its free.
www.aomci.org/cgi-bin/yabb2/YaBB.pl?board=askamember
Mike aka pathfinderz1

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.183 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1967 23 ft powercat flybridge
( / Boats)

noimage
11-17-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 8539 guests and one member online