TOPIC: Johnson Ship Master controls

Johnson Ship Master controls 10 years 3 months ago #100351

BLPen163
Topic Author
Offline
Fresh Boarder
Posts: 36
Karma: 1
Thank you received: 0

What position are the levers supposed to be in when starting the motor?
First time trying to start it and the starter motor is turning but not engaging. Wondering if I have a safety that is not right or something simple I need to do. I have a full shop manual on the way for the motor but its not here yet. Motor is 75hp sea king magneto. Sorry for the stupid question...Thank you

Attachments:

Please Log in or Create an account to join the conversation.

Re:Johnson Ship Master controls 10 years 3 months ago #100363

rdubyau Offline Junior Boarder Posts: 62 Karma: 3 Thank you received: 0	Stupid question? Not at all. The only stupid question is the one not asked. I believe the F/R (black) lever should be straight up in neutral. The throttle should be moved forward to its highest allowable position somewhere between 1/3 and 1/2 throttle. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Proud member of the \\\\\\\"Raiders of the Schlitz Box\\\\\\\"

Re:Johnson Ship Master controls 10 years 3 months ago #100387

Robby321 Offline Contributing Member Posts: 902 Karma: 42 Thank you received: 10	If the starter is spinning but not engaging, its a bad Bendix drive on the starter, or stuck. Disconnect the battery first, then see if the Bendix freely rotates up to engage the flywheel by hand. Be careful here. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.