Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: How hard is it to pull the Deck on a G3?

How hard is it to pull the Deck on a G3? 3 years 1 week ago #145867

  • Pappy
  • Pappy's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 149
  • Thank you received: 22
How hard is it to pull the deck on a double cockpit G3? The one I have had been off a few years ago and supposedly it had been kept in dry storage since the floor, stringers, and transom was replaced. I have photos of the job and the progress.
However........ I am the first person to put the boat in the water as it was sold prior to the last two owners putting it together and getting it wet.
Have only had the boat in the water for about a day total. Was looking at the transom a few days ago and it has cracked and pulled in severely where the transom bolts go through. Pulled the engine (1962 V4-75hp) and stuck a pick in the holes and the wood is rotten! Yes............I used boat life silicon in and around the bolt holes. Have mounted hundreds of engines in my career.

Please Log in or Create an account to join the conversation.

How hard is it to pull the Deck on a G3? 3 years 6 days ago #145869

To separate the deck from the hull, you will need to remove the "rubber" rub rail material.
Then drill out all the fasteners (probably rivets).
Then cross-brace the hull in a way that will keep it from deforming, but give you room to complete your repairs.
Then - if the hull has never been separated or additional fiberglass attaching completed in the past,...
Behind the rubber rub rail you will find an "S" shaped area in the aluminum trim that secures the hull to the deck.
The deck will lift up out of the trim, and the hull will move down out of the trim, and you will be ready to start repairs.
AND,...When you are focusing on an elephant motor for your project,...Consider the much lighter, higher performing Mercury.
doc


Attachments:

Please Log in or Create an account to join the conversation.

How hard is it to pull the Deck on a G3? 3 years 10 hours ago #145911

  • Pappy
  • Pappy's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 149
  • Thank you received: 22
Lol love it!
Hey......that looks more like an OMC on top of a Merc ! How fitting ! Paybacks are hell !
Merry Christmas by the way!

Please Log in or Create an account to join the conversation.

How hard is it to pull the Deck on a G3? 3 years 9 hours ago #145912

  • ed-mc
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1412
  • Karma: 232
  • Thank you received: 117
OW! My Eyes! That can't be unseen! Thanks, Doc, now I need to order another Lebenty-Lebben cases of Eye Bleach!! :sick: :woohoo:

Merry Christmas and a Happy New Year!!.............ed

Please Log in or Create an account to join the conversation.

How hard is it to pull the Deck on a G3? 2 years 11 months ago #145977

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1579
  • Karma: 87
  • Thank you received: 58
Have a little respect! They're dead...he of suffocation; she of a Big Mac overdose.

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

How hard is it to pull the Deck on a G3? 2 years 1 month ago #147353

  • Pappy
  • Pappy's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 149
  • Thank you received: 22
Well, once again the boat is finished. When I bought the boat it had a new floor, stringers, and transom in it. After only a few hours in the water over several months the transom was already soft.
Deck was pulled and a composite transom installed. Transom is 1" higher than it was. Spash well is now glassed in. About 2' of floor and stringers had to be replaced as well. Looks super with the glassed in splash well.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.165 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1956 Lonestar Meteor
( / Boats)

1956 Lonestar Meteor
12-24-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 10977 guests and no members online