|
Welcome,
Guest
|
TOPIC: New to me G3
New to me G3 7 years 10 months ago #130201
|
Hello,
I just bought a center deck G3 today. It came with a trailer and an Evinrude 35HP. The bought has been neglected, left outside and is dirty. Where should I look for damage? I'll upload photos soon. Thanks, Chris |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130220
|
Chris:
Welcome to the website Sir and congratulations on getting your G-3!  They are great boats!To answer your questions, the first place to check is the transom and the floor. If your boat is a center deck, you will have the wood stringers so if the floor is rotted then the stringers are usually bad as well. I have a 1960 G-3 (center deck) which has been in our family since the day it was bought new by my Dad. I will post a link to that for you so you can read about our "refurbish." Good luck with your project Chris! |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130221
|
Chris:
Here is a link for you of the thread I did on the "Refurbish Of Our G-3" on another Glasspar Website: www.classicglasspars.com/index.php?option=com_kunena&view=topic&catid=2&id=23809&Itemid=219 Hopefully, this should help you some. |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130236
|
Thanks! I am reading through the restoration of your boat. !'ll have photos of mine tomorrow.
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130253
|
chris ioakimedes wrote:
Chris: You are very welcome Sir! I hope the link is able to help you with your G-3. I know that I had alot of help and advice from fellow Glasspar Owners when we did the "refurbish" of our G-3. Looking forward to seeing your G-3 pictures! |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130260
|
Here is that ad that I saw with the boat for sale.
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130261
|
And here is a picture of it in front of my shop.
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130271
|
Chris, it looks like you have a pretty nice G-3 there. Have you had a chance to check the transom or floor condition yet? Also, what size Johnson Outboard was on that boat? I couldn't tell from the pictures. When my Dad first purchased our 1960 G-3 he had it set-up with a 1960 Johnson 40 H.P. Outboard, but about a year later traded that in for a 1960 Johnson 75 H.P. which helped my older Brother be able to get up on skis as he was very tall. That 1960 Johnson 75 was on our G-3 for almost 20 years before my Dad replaced it.
Thanks. |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130272
|
Very nice sir!! Now, after restoring it, you will need to have more hp (60-75 hp) on the G-3! It was a go-fast ski boat when new and it can't go fast with a 35 hp engine! Here is mine with a 1969 100 hp Merc! I raced boats for 20 years including a 1960 G-3 I bought new in 1960 with a 75-hp engine!! Enjoy and keep us posted on its progress!!
My first one with 75 Johnson and the one I have now with the 1000 Merc "tower of power (1969)" You don't need 100 hp, as it is a bit scary, but 60 to 75 hp works great on the G-3!! Jim Savage Crawfordville, Fl. Good to see you are still kicking too JP!!! 
|
|
Please Log in or Create an account to join the conversation.
Jim Savage
|
Re:New to me G3 7 years 10 months ago #130273
|
Here is pic of the G-3 I now have with the 100 hp Merc!! Run this one and never get the bottom wet!!!!lol
Jim Savage 
|
|
Please Log in or Create an account to join the conversation.
Jim Savage
|
Re:New to me G3 7 years 10 months ago #130276
|
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130277
|
Chris I have a 1966 Johnson 100HP Golden Meteor for sale that runs beautifully. I have tach gauge, control box, a couple of props, and lots of extra parts. I got it running last year after it had been sitting for 7 and it hasn't let me down at all. I'm just in the process of repowering.
It is located in Sacramento. Private Message me if you would be interested. Price is negotiable. I would rather it go to a good home. Sincerely, David 
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130279
|
Wow! Thanks for all the responses. I did get what looks like what might be the original motor for the boat, a Super Sea Horse 35 HP. It was sitting in the back of the boat with its cover off and plugs removed. It still turns over, so...
My boat will need a new transom, especially if I put 100 horses on it. I can be in Sacramento pretty quick... The floor has a few areas that had rotted through. I removed the rot in these areas and the stringers seem like they might be ok. 
At the edges where I cut the holes in the floor, the plywood feels good. If I cut these areas out larger to the midpoint of the nearby stringers, would patching the floor be acceptable? Thanks, Chris |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130281
|
Actually, you probably have a 15" transom and my motor is a 20". You would have to build it up 5" to support the motor.
Also, I read the Craigslist ad. Make sure you can get it registered before you spend too much time and money on it. California likes titles for both trailers and boats. A bill of sale won't cut it. At least, it didn't with my situation. Welcome to the hobby! And just know that at times it will be frustrating, but in the end, the fun on the water and all the friendly discussions you have will outweigh any of the negative. As a newbie here was my priority formula. 1. Structural (Make is safe.) 2. Functional (Get it to run and work out kinks) 3. Visual (Make it look nice) I'm on step 3 now, but I had a lot of fun with it last year. Best of luck! |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130287
|
I created a web page for my G3 project. You can see it here
http://fattiretrading.com/g3.html
Thanks, Chris |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130298
|
Nice job on the web-site.
IMHO,...An I am not fiberglass expert to say the least,...You should look very closely at the wood in the stringers, because - unless they have been replaced in the last 10-15 years, they are probably rotten. The stringers in the G-3 are extremely important to the structural integrity of the hull. If they are weak (rotten, etc) the hull will flex around and not only allow your bottom to get out of shape, it can present a high risk of allowing the layers of glass in the hull to separate causing an extremely dangerous situation. It is a LOT of work to do it right, but you will be glad to did when you are done. doc 
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130303
|
Chris:
I like your website Sir! Looking forward to watching your progress on the G-3.Chris, I agree with Dr. Frankenmerc on the floor/stringers issue. As he said, the stringers are very important to the overall integrity of the floor and boat. If you are on a budget, I guess you could patch the areas with the holes, but I think replacing the stringers are a better idea. Also, it looks like your transom will also need to be replaced. Remember that there is about a 15 degree "bow" to that transom when you get to that point. |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130305
|
Thanks guys.
Like I said before, My transom definitely needs to be replaced. It appears that in order to replace the transom, I will need to remove the deck. Is it held on by the rub rail? As per the floor and stringers, I think the next thing to do is expand the areas where I removed the rot to the centers of the nearby stringers. This will enable me to inspect more of the stringers and decide whether I need to remove the whole floor and possibly the stringers, or confirm that the stringers are ok and patch the floor. Does anyone have any extra parts? I need emblems, steering wheel, and maybe some trim pieces. Can anyone confirm that my seat is original? Thanks, Chris |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130320
|
That IS NOT the original seat sir!!!!
|
|
Please Log in or Create an account to join the conversation.
Jim Savage
|
Re:New to me G3 7 years 10 months ago #130329
|
Thanks Jim! Are the brackets in the floor original?
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130333
|
I spent some more time inspecting and taking pictures of the boat yesterday. I have updated the webpage
http://fattiretrading.com/g3.html
with new photos. Two or three of the stringers ( I want to call them joists) under the front deck have completely rotted away. Were the outer deck stringers originally double, or did someone sister new ones in later?
Thanks, Chris 
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130337
|
WOW Chris,.....you definitely have your work cut out for you Sir!
As Jim said, no, that is NOT the original seat and it looks like the prior owners tried to re-fiberglass under the front deck but did not use any fiberglass resin to make the cloth adhere to the old surface! However, those seat brackets fiberglassed into the floor DO LOOK ORIGINAL! Chris, those deck stringers or "joists" also do NOT look original to me. On our 1960 G-3 Glasspar put fiberglass tape AND resin over our deck stringers then painted over that with the original gray "Zolatone" Interior Paint that they used on most all of their boats. I will try to get a picture of here for you so you can see what I mean. Also, I noticed on the transom that it appears they have "through bolted" a piece of wood to hold the motor on. But you will have to redo that transom anyway. |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130339
|
Now that I am further into assessing what this boat needs, I beginning to think that its not a worthwhile project.
Thanks, Chris |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130341
|
Dang Chris,....I am sorry to hear that Sir!
 I was getting some info together for you on where to get your G-3 Emblems, steering wheel, outboard motor and other parts. Please come back if decide to look for another G-3. I promise you there are many out there in very good shape.Take care Sir! |
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 10 months ago #130352
|
Welcom Chris, and congratulations on your find.
Don't be disheartened yet. From your photos it appears the original fiberglass shell (from the mold) is in very usable condition and worth restoring. Any G3 is worth saving if it can be done, thay are a remarkable little boat and you will love it when finished. Bonus: it is a centredeck. So, separate the top (drill out rivets in rubrail, rail will stay with the top). The worst part is removing all previous bad workmanship, a bit dusty (wear a mask) and then do it properly. Not difficult if you do a bit of research and pay attention to detail. Time consuming but rewarding. You should consider making it a 20" transom at the same time, bigger choice of motors.. Checkout the old forum on this site where you will find just about anything you need to know. Drop-down menu under 'forums' > Forum archives > G3 Owners Assoc. Many here will give advice if you encounter a particular problem. Good luck! Ken |
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 9 months ago #130956
|
I want to add my two cents to the discussion as to the worthiness of the project. I restored a 1960 center deck four years ago that was in worse shape than your. I had no experience with fiberglass or with taking a boat apart. The only downside for me aside (aside from the hard work) was that I damaged the original port side rub rail and had to replace it with something more modern. The upside is that I learned a lot about boat building, using fiberglass, the importance of good friends, and what the term "craftsman" is all about. And, while the work isn't perfect, the boat turned out beautifully resulting in many envious compliments. It was rewarding enough that I would do it again if the opportunity presented itself. And, believe me when I say, there are few things as exhilarating as punching the throttle on a 13 and a half foot rocket! I would be happy to share some of my experience and ideas on how to do things if you're interest. Send me a friend request on Facebook and we can connect thru private messaging.
Here's a few before and afters of my project. 
Douglas Speck |
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 4 months ago #133335
|
Would you like another G-3 ? I always envied yours and I know if you take it you'll restore it. Look on the G-3 forum. It's free to anyone who will restore it.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:New to me G3 7 years 4 months ago #133338
|
Wow! What an offer! I might take you up on it, but I have to wait for some Dr. visits before I can say. In the last month, it appears I have been afflicted with rheumatoid arthritis to the point where it is difficult to use my arms and hands for even light work. I'm scheduled to see a rheumatologist a week from tomorrow to see what's going on with my body. In my current state, it would be impossible for me to crawl around the interior to the degree required by a full-blown restoration. If I may, I will stay in touch and we'll see how things turn out.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:New to me G3 7 years 4 months ago #133339
|
I'm in the same boat (pun intended). Too little money and too much pain. I really want her to find a good home so if no-one else steps up before I have to move in the spring I'll still have her if you still want her. I hear good things about glucosamine sulphate from a couple buddies who take it for that. Might be worth a shot ? I hope the news is good. Have a great night.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:New to me G3 4 years 10 months ago #141786
|
I'm back! I got discouraged with my last G3 and have not made as lot of progress on it. The hull ID tag is missing and I don't have any paperwork for it, so I put the project on the back burner. But today, I got another one that is in much better condition. When I got it, it was full of stuff and I expected the floor to be really bad. Once I got everything out and cleaned it, it is a lot better than I expected. This one has the hull ID tag and I got it's pink slip as well as the one for the trailer.
|
|
Please Log in or Create an account to join the conversation. |
Time to create page: 0.439 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
1956 Lonestar Meteor |
Mercury outboard( / Engines)
11-03-2024
Classic Mercury Outboard Motors( / Engines)
10-18-2024
FG Login
FiberGoogle
Who's Online
We have 11217 guests and no members online