|
Welcome,
Guest
|
TOPIC: Jack Plate
Jack Plate 10 years 9 months ago #91186
|
Need a good design for a jack plate. Anybody ever built one???
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91187
|
never built any but I may have one in the back 40, I will not be able to get to it until the snow goes, frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91190
|
Just google
DIY jack plate, there are several hits that all have fairly decent designs/plans. Several of them are very detailed. What boat & motor combo? Note: I wouldn't DIY a plate for a go fast boat or a motor bigger then say a 75hp +/- w/out KNOWING that it'd be able to stand up to the weight, torque & etc a large hp motor will put on it. |
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91204
|
There's a place in TN that makes one with minimal set-back (4"), but I can't find their listing right now. This one pops up on the search, not sure the materials to build one would cost you much more than that?
|
|
|
Please Log in or Create an account to join the conversation.
Mark
|
Re:Jack Plate 10 years 9 months ago #91209
|
My Texas Made Impala is rated to 85 hp. The problem is I have a long shaft Scott Atwater 75 and a short shaft transom. I have already strenthened the transom at several locations so 75 hp will pose no problem.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91210
|
Thaks Frog. Let me know after the white S**T goes away.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91211
|
frogman wrote:
I'm sorry I meant knowing the DIY fab'd jack plate would stand up to use w/ a large motor. Since I am neither an engineer or an aluminum fab wizard  Mark's ebay link sounds pretty interesting. And much more adjustable then most of the DIY plates you can find thru a google search. He's probably right that it's about the same cost as all the raw materials alone. If you go straight bolt up, minimal (no) adjustment, you might be a good bit lower for materials. So it's a trade off..... |
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91218
|
The jack plate will only be used for vertical adjustment. I`m not an engineer either just a guy that has built a couple of boats. Doug Young has one of the aluminum boats my brothers and I built.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91228
|
I just ordered a new Hi Jacker for $159.00 this morning, including shipping.
www.wholesalemarine.com/t-h-marine-hi-jacker-jack-plate-jp-1a-dp.html?gclid=CM7G8r_eob0CFS1eOgodLx0A5A |
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91237
|
frogman wrote:
frogman: I have never built a jackplate, but we do have a "Bob's Machine Hydraulic Jackplate" on our 1960 Glasspar G-3. We are very happy with it and "Bob's Machine" is an excellent company to deal with. Customer service is excellent. They also sell manual jackplates like the one Mark posted. I have posted a couple pictures of our unit for you to see below. BTW,....here is a link to their website if you are interested: www.bobsmachine.com/main.sc 
Frogman, one thing I really like about our jackplate is it only has a 3 7/8" setback which is pretty minimal for these units. |
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91252
|
Good looking unit redg3, but that will cost more than I've got invested in the motor. I picked the motor up at the Witcha Falls auction for $40.
I am a low budget (cheap) boater. I`ve only got $400 invested in the whole rig. |
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91253
|
frogman wrote:
Thanks Frogman! Yes, your right, the jackplate we have is not the cheapest but still of excellent quality. I hear you on being a "low budget boater." Take care Sir! |
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91269
|
frogman, if you can wait until I get to look for it you can have it for postage, just because I like your name. frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91282
|
You bet I can wait. It has already hit 80F down here in Dallas. I will work on bringing the Scott back to life till I hear from you. I have a Gale/Sea King 35 on the Impala now. It will be exciting to double my HP. Whooo Hoooo.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91294
|
ok give me some time to let the snow goes, we got 6 inches more in the last 2 days. frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91319
|
frogman, I borrowed a snowmobile yesterday and went out to look at the jack plate. and it was gone. some ass hole stole it on me , sorry. missing a few other parts also. hope I find this pr#ck. frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91395
|
Man I really hate that you have a problem like that. Down here if we catch the theif at it we are legal to pratice some shooting.
Any way many thanks for trying. New to me, using a snowmobile to check inventory. My place is small enough to chuck a rock across it. Again many thanks for the effort. |
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91414
|
frogman, yes iam lucky. i live 3.5 miles from town and own 80 acres, 50 of them are woods and i have 2 small rivers that run thru. real good hunting, just alot of snow and not much of a summer. frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 9 months ago #91439
|
Where are you at? Dad had 80 acres north of Springfield Mo. The place next to him had a turkey roost that 2ft of droppings under it. Never wanted for good hunting till he passed.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 8 months ago #91515
|
frogman, iam in north central Minnesota. love living here. I hate big city living. just got back from the twin cities, been down there for 2 days, and have to go back in 3 weeks for more testing. to much traffic and people. frog
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 8 months ago #91535
|
We`ve got a travel trailer on the Brazos down by Cleburn and get there just about every other weekend. 30+ deer in the local heard that bed down 100ft from our rig.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Jack Plate 10 years 8 months ago #91561
That's one of the nicer units I've seen John, you did well finding that one! I also love the story about everyone telling you a jack plate wouldn't perform well on your boat, but tried it anyway and it worked out fine. Sometimes you just have to try something different and it works.  |
|
|
Please Log in or Create an account to join the conversation.
Mark
|
Donate
Please consider supporting our efforts.
Glassified Ads
1956 Lonestar Meteor |
Mercury outboard( / Engines)
Classic Mercury Outboard Motors( / Engines)
FG Login
FiberGoogle
Who's Online
We have 11449 guests and 3 members online