TOPIC: Aluminum Rivets

Aluminum Rivets 9 years 11 months ago #101769

hodgify
Topic Author
Offline
Senior Boarder
Posts: 163
Karma: 8
Thank you received: 0

Getting ready to replace rivets in a 16 ft smokercraft and I not sure what type of rivet to use . I have worked on aluminum aircraft and have replace a lot of rivets but have used a lot of different solid rivets from soft A rivets to heat treated frozen rivets . I can buy rivets from Spaenaur aluminum alloy no 1100.f(2-s) which seam softer than standard aircraft rivets. Anybody know the proper type ?
Thanks Hodgify

Please Log in or Create an account to join the conversation.

Re:Aluminum Rivets 9 years 11 months ago #101771

Frederic Lynes Offline Junior Boarder Posts: 119 Karma: 11 Thank you received: 0	Are they not Olympic rivets, like what's used on Airstreams? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Frederic Retired Army Guy 1969 OMC Evinrude Rogue II 210 163 original hours

Re: Aluminum Rivets 9 years 10 months ago #102722

RickG Offline Fresh Boarder Posts: 41 Karma: 1 Thank you received: 1	If the rivets in your boat now don't have the tell-tale dimple in the center of the head, then the softer 1100's are likely what you have. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.