Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: New member, My project : johnson reveler 1967

New member, My project : johnson reveler 1967 5 years 7 months ago #139553

Welcome aboard Eric, glad to have you aboard! That will be an awesome project please post plenty of pics as you go. Of course if you have any questions, ask away and we''ll do our best to answer them.

Bob

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139573

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
This is the boat when I picked it up. Single hull, no interior, no seats.
Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139597

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
The first work done after cleaning was the repair of the back panel. Replacement of plywood. Gluing with marine polyurethane glue.

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139598

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Repair of engine mounting pedestals.
Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139599

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Repair of steering pulleys at the stern of the boat.
Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139600

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Repair of steering pulleys at the stern of the boat. [/quote]

evb11 wrote:

Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139601

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
The original engine an omc buick v6 155hp will be replaced by a Mercruiser 3.0l 140 hp.
Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139605

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Painting of the dashboard [attachment

=51850]20170820_221510.jpg[/attachment]

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139606

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Model number and the Serial number

Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139607

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Manufacturing of the internal panels

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139608

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Carpet installation and seat positioning





Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139609

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
The ended inside











!

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139610

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Next step in setting up the engine.......soon !









Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 7 months ago #139611

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
So I’m waiting to put the engine on. I’m polishing the hull back to its original luster.
I’m looking for an original top. Mine’s in bad shape......and the green and red signal lamp

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 5 months ago #140274

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
I’m having a compatibility problem fixing the omc Coupling on my Mercruiser. I can’t fix the Coupling on the flywheel. Coupling fixation is not the same on the new Mercruiser model than the old one. The CRANKSHAFT is différent. Does anyone have a solution?
Thanks

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 5 months ago #140277

She looks great. Sorry I can't help with the coupler but if you maybe post the question to the I/O forum on here someone with info can probably help.

Bob

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 5 months ago #140278

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
What a beautiful job. That model is the first boat I ever refurbished, same interior back in 1985. The Buick V6 motor is a beast and can take a lot of punishment and parts are still available. If you cannot get your problem solved with the coupling you might want to rethink putting the original motor back in or get a Mercury outdrive.
Here's the link for the other forum.
fiberglassics.com/forum/stern-drives.html
The following user(s) said Thank You: evb11

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 5 years 5 months ago #140291

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Hello,
I’m actually thinking of putting back the original engine, an omc 120hp. I was wrong looking at the serial numbers of the boat. It is a reveler 120 and not a 155 as I originally thought. I have put on sale my Mercruiser 140
Changing the outdrive requires completely redoing the back panel. I don’t want to do this work. I want to keep the boat as it was originally.

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 10 months ago #141809

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
]My new engine. Omc 120 hp. Small restoration. degreasing, painting. it is cleaner

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 10 months ago #141811

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Engine inside, next step the electrical connections...

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 10 months ago #141816

  • Dr.Go!
  • Dr.Go!'s Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1719
  • Karma: 19
  • Thank you received: 125
Nice. Making major progress. I used to have a plastic toy boat that look very much like this model except in green. Yours has a very clean look about it.

Please Log in or Create an account to join the conversation.

Dr.Go!

New member, My project : johnson reveler 1967 4 years 10 months ago #141859

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
If someone is interested I have the Johnson reveler 1967 parts. It is scanned I can send it by email
Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141967

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
A little diy at home during confinement due to the Corana Virus ! Not having the boat at home I can not advance the works. I had recovered an intermadiate housing an a gearcase group . I cleaned the whole thing and put a little paint on it. It’s cleaner! Still to assemble.....

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141969

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
Looks nice. Glad to see most of us find something to do. The waistline is suffering though. Spending too much time in the kitchen!

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141971

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1579
  • Karma: 87
  • Thank you received: 58
Looking for a full time boat restoration job? I sure could use a guy with your talent. Great work!

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

New member, My project : johnson reveler 1967 4 years 9 months ago #141972

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
It is a job that I would like very much! My professional activity leaves me time, so I can reconcile work and leisure ;)

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141973

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
The ball gear looks like it's in really good condition. Most are worn down from people running with the trim foo far up. Jan will provide free housing, meals, and transportation plus unlimited health care for you and family. Just bring your talent and beer.

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141976

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Indeed it is in good condition. I have to take care gearcase group now but I have more paint !





I have to take care gearcase group now but I have more paint !

Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141978

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
Does the power trim still work? If I can recall it just takes regular oil but should be nice and clean. I do have some spec material for that. I'll have to look for it. Your welcome to have it if you want. I think it's for the 155hp V6.

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141981

Outstanding work, she's coming along great!!!!!! The joy of the virus quarantine.....we can get restoration stuff done!

Bob

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 9 months ago #141982

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

63 Sabre wrote: Does the power trim still work? If I can recall it just takes regular oil but should be nice and clean. I do have some spec material for that. I'll have to look for it. Your welcome to have it if you want. I think it's for the 155hp V6.


I cleaned it, but I didn’t test it. I don’t have what it takes here. Actually the parts come from a omc 155 but the engine I install is the original 120 hp engine. These pieces are replacement pieces in case of breakage. In france parts become rare and expensive !
For specific equipment it would be cool but I live in france!!

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 7 months ago #142397

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
I got back to work on my reveler. He has to sail this summer after 30 years of stopping. Electrical connections almost complete !



Attachments:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 7 months ago #142402

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
Sweet. Tres bien. My French is not good.
:unsure:

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 7 months ago #142404

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

63 Sabre wrote: Sweet. Tres bien. My French is not good.
:unsure:


Merci :)

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142808

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
First run., a few more points to review cooling and fuel supply.......
Johnson reveler 1967 OMC 120 hp remise en route

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142809

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
remarquable! Is that right?? :)
merci

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142810

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

63 Sabre wrote: remarquable! Is that right?? :)
merci


Yes, c'est ça :)
I still have a few things to fix. The engine is heating up a bit, I’m going to change the water pump, put back a thermostat and add a small fuel pump.

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142889

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Next run. Everything seems to be working good :)

Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142890

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Some Pictures. Étang de Leucate France








Please Log in or Create an account to join the conversation.

New member, My project : johnson reveler 1967 4 years 5 months ago #142893

  • 63 Sabre
  • 63 Sabre's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 4676
  • Karma: 147
  • Thank you received: 167
Étang de Leucate or 'Étang de Salses
Thanks for sharing. Brings back memories of the one I used to have in the 80's

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.413 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1956 Lonestar Meteor
( / Boats)

1956 Lonestar Meteor
12-24-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 13412 guests and one member online